Gravity 280 FPV Racing Frame

Gravity 280 FPV Racing Frame
Gravity 280 FPV Racing Frame
Product Code: gravity280
Availability: In Stock
Price: £49.00
Qty:     - OR -   Add to Wish List
Add to Compare

Gravity 280FPV Racing Frame Yellow.

The Gravity 280 FPV Racing frame has been CNC machined to the highest tolerances from two pieces of HDPE. This frame must be one of the toughest racing frames on the market and comes with a Lifetime Frame Warranty*

The Gravity has been designed around specific components to keep the frame as low as possible. Recommended components are as follows: 

  • Naze 32 with horizontally soldered header pins
  • 2200 series motors with 6” props
  • BLHeli 20 amp ESC’s
  • CC3D Power Distribution Board
  • Skyzone TS5823 VTX

 Main Features:

  • FPV camera protection
  • Motor protection
  • Accessible VTX dip switches from window in Top Cover
  • Lipo balance lead socket
  • Battery strap slots
  • Motor ventilation holes
  • LED rear bumper for 8 programmable LED’s
  • Naze 32 LED indicator window
  • Naze 32 pre-drilled mounting holes
  • CC3D PDB pre-drilled holes
  • Large airflow slots in motor arms
  • Machined channels in arms for motor wires
  • Pre-drilled Top Cover for Fossils Stuff Active Tilt Mechanism (ATM)
  • Central COG with 4S 1.8ah lipo battery

The Top Cover can be easily removed and re-fitted with only 4 M3 screws allowing quick and easy access to the inside.

Material                              HDPE
Weight                               175g
Size                                    280mm PCD
Flight Controller                 Naze32
Motor Size                         2200 series
Maximum battery size        4S
The Lifetime Frame Warranty* covers either part of the frame that has been damaged badly enough to render the frame un-flyable. The damaged part/s will be replaced on return of the warranty certificate and the damaged part/s. The frames will need to be registered with Fossils Stuff either by email or post for the Warranty to be valid. This warranty is valid for the lifetime of the Mainframe and Top Cover.
Holes may be drilled in Top Cover for VTX antenna and LED wire route at rear of mainframe. No other modifications may be carried out.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Powered By OpenCart
SupremeFPV © 2018